Check 411SC illuminated airline rail fit before ordering

Check wall space, fitting compatibility, supply voltage and LED orientation for the 411SC before installation.

25 July 2023Updated 23 September 2026

Short answer

For the 411SC, measure usable wall length and mounting surface, then confirm that the rail slots match the existing airline fittings. Choose the vehicle supply voltage and whether one- or two-sided lighting is needed. Compare the hole pattern with the body drawing, and confirm the cable route and connector variant from the product sheet.

An illuminated rail must match the body, fitting, mounting holes, wiring and light direction.

Pre-install checks for the 411SC

Compare the profile dimensions with the body drawing. Confirm the hole type and spacing from the current product drawing before drilling.

Check fitting diameter and slot spacing. Match supply voltage, LED side and cable exit to the vehicle system. Keep cable clear of moving parts and cargo.

List product code, profile length, LED side and electrical connection together on the order.

Sources and correction policy for this article

Topics:Vehicle bodywork hardware

Bodybuilders →