Test castor layout with the loaded carrier on its actual route

Swivel and fixed castor layouts depend on the model. Test manoeuvring and stopping with a loaded carrier on the actual floor.

26 January 2026Updated 23 September 2026

Short answer

Verify castor type and rating on the carrier's model label; do not assume a two-swivel/two-fixed layout on every model. Check total load, floor and thresholds, then push, turn and stop the loaded carrier under supervision. Do not rely on fixed wheels on a slope; use manufacturer-approved brake/restraint instructions for parking or inclines.

Castor behaviour depends on model, load and floor. Do not apply one arrangement diagram to every transport carrier.

Check label and total load. Get swivel/fixed castor type, brake option and permitted load from model documents. Consider carrier, product and accessory weight together.

Trial the loaded route. Under supervision, test level flooring, thresholds, turns and ramps. Check stability, steering and operator visibility, and record conditions.

Assess parking separately from manoeuvring

Castor layout may aid movement but does not guarantee stopping or holding on an incline. Follow maker instructions for brakes, locks and chocks.

Report faults

If a castor has play, damage, ineffective brake or slips on the floor, move the load to a safe area and notify service. Do not continue with unsuitable parts.

Sources and correction policy for this article

Topics:Containers and equipment Warehouse and dispatch

Cold chain logistics →Isotec guide hub →What the cold chain is →