Choose TBX 900 to 1170 variants from drawings

Do not assume all four codes share a base or fixed heights. Compare variant drawings and measure route clearance and crate stacking.

10 January 2025Updated 23 September 2026

Short answer

GEBHARDT's pallet TBX table lists a 797 × 1200 mm external footprint for 900, 1000, 1070 and 1170, with heights of 1784, 1884, 1984 and 2134 mm respectively. Measure the lowest clearance with the closed container; trial crate stacking and handling on site.

GEBHARDT's pallet TBX table lists a 797 × 1200 mm external footprint for all four variants, with external heights of 1784, 1884, 1984 and 2134 mm respectively. Verify these measurements against the current drawing for the exact model code.

Compare all four variants in one table

For each full model code, record external footprint, height, usable internal dimensions, base construction and the manufacturer's stated load limit. Note the drawing revision; do not treat different base types as dimensionally identical.

Test fit with the site and load

Measure the tightest or lowest point at vehicles, doors, lifts and rack passages. Trial stacking with the actual crates and lid arrangement, and check handling-equipment compatibility.

The four sizes sharing one footprint are listed one after another in the Isotec TBX range.

Record clearance, loading and unloading issues on a pilot route. Tie the chosen variant to its drawing code, measurement sheet and trial result in the purchasing decision.