Aris Makina & Otomotiv
TREN
GEBHARDT eutectic cold plates in blue, white and red, embossed -21 °C
Blue, white and red eutectic plates laid over one another, GEBHARDT embossed on their faces
Three GEBHARDT eutectic plates in blue, white and red lying on crushed ice
Two red eutectic plates side by side in the galvanised rail under the ceiling of an Isotec container
Isotec TBX container with the door open; red eutectic plate on the top shelf
Galvanised freezing rack loaded with white and red eutectic plates
1 / 6
Cold chain

Eutectic Plates

Professional reusable cold packs for Isotec containers, available with -3, -14, -18 and -21 °C melting points for fresh or frozen goods. Unlike small consumer gel packs, these eutectic plates are selected as part of the container and route configuration. The GEBHARDT plate brochure puts the savings potential at up to 41% against dry ice.

Brand
GEBHARDT
Melting points
-3 · -14 · -18 · -21 °C
Sizes
3 standart · 480×280 / 615×378 / 390×295 mm
Reusable
✓
Request a quoteEutectic plates technical paper (EN)
What to include in your quote request
  • Reference / product code-
  • Quantity you need
  • Delivery city
  • If the reference is unknown - a drawing or photo, sent to info@aris-makina.com

Advantages at a glance

  • Four melting points: -3, -14, -18 and -21 °C
  • Three body sizes: 390 × 295 × 34, 480 × 280 × 34 and 615 × 378 × 34 mm
  • Food-safe polyethylene shell, non-toxic brine filling
  • Bought once, refrozen for every trip
  • The freezer must be at least 5 °C below the plate's melting point
  • Up to six plates fit the upper rails of a container

Melting point and body size

Melting point390 × 295 × 34480 × 280 × 34615 × 378 × 34
-3 °C✓✓✓
-14 °C-✓-
-18 °C-✓-
-21 °C✓✓✓

Plate dimensions L × W × H, mm. -14 and -18 °C are offered only in the 480 × 280 body; other melting points on request. Source: GEBHARDT product page, checked 6 August 2026.

Where it is used

Cold chain logistics
Cold chain logistics
Seafood logistics
Seafood logistics

Guide pages

GEBHARDT eutectic plates: melting points and sizes

Four melting points, three body sizes and which combinations actually exist.

How long Isotec holds the cold: pre-cooling and thermal analysis

How to read the 24-hour statement alongside preparation, load regime and route inputs.

Related articles

How to choose a eutectic plate's melting point (-3 or -21?)
How to choose a eutectic plate's melting point (-3 or -21?)

A plate delivers its cold near its own melting point. For fresh food the -3 °C plate is the right tool, for deep-freeze the -21 °C plate; conditioning temperature and container fit complete the choice.

How are eutectic plates frozen? Rack, time and checks
How are eutectic plates frozen? Rack, time and checks

For GEBHARDT plates the freezer runs at least 5 °C below the melting point, air stays free between plates, and a set leaves only when the filling is solid.

Eutectic plates or dry ice? Choose by workflow
Eutectic plates or dry ice? Choose by workflow

Choose by product requirements, route, supply and preparation capacity. Trial both arrangements with the same load and compare your records.

Similar products