Specify quantity and compatibility in a plate order

Add part code, phase point, body size and set information beside quantity. Verify fit and rail capacity in the selected model documents.

5 November 2025Updated 23 September 2026

Short answer

On the order line, state manufacturer code, plate phase point, dimensions, quantity and intended container. Show set and spare quantities separately. Do not assume rail capacity or code equivalence; obtain supplier confirmation against the exact TBX model technical table.

GEBHARDT lists its 480 × 280 × 34 mm -3°C plate under code 1006919, and the same-size -21°C plate under code 0074699. Geometry matches, but phase point and part code differ; do not substitute one code for the other. Phase point alone does not establish product temperature or route duration.

Describe the part on the order line

State manufacturer part code, declared phase point, dimensions, quantity and delivery location. Add the model and size each plate set serves; list set quantity and spare stock separately.

Verify fit against the model

Confirm plate code, body dimensions and carrier rails against the current manufacturer table. Do not transfer a maximum slot count from one model size to another; use the technical document for the selected variant.

At receipt, compare label and dimensions with the order. If they do not match, send the supplier the model code, drawing revision and photo for written clarification before fitting.