Time between stores alone does not show plate suitability; measure the full round's load and dwell profile.
Collect route data
Record depot departure, arrival and receipt at each store, dwell, lid openings and load changes.
Note route changes, season and vehicle conditions separately; distinguish estimated from actual time.
Check plate test scope
Obtain the exact plate model, conditioning instructions, test load, ambient profile and measurement points from manufacturer documents.
Have quality and technical owners assess whether test conditions match the product, container and route.
Verify on the actual route
Run a representative loaded route trial with product sensors; define reading interval and placement under the approved plan.
Review test scope when route, product or load changes; do not automatically transfer old results to a new arrangement.
Use only an arrangement verified for the measured route and product criteria in dispatch instructions.
