Aris Makina & Otomotiv
← Blog

Risk and emergencies5 / 29

How to verify shipping conditions for beneficial insects
24 July 2026
How to verify shipping conditions for beneficial insects

Match species, life stage, packaging and supplier protocol to route records.

Transport and routing
How to report avoided product loss
24 July 2026
How to report avoided product loss

For an avoided-loss claim, show the measurement scope, matched comparison baseline and actual product disposition.

Risk and emergencies
What records help explain warming at the final stop?
24 July 2026
What records help explain warming at the final stop?

Align logger time with stop, load and door records; do not attribute the final-stop reading to route duration alone.

Risk and emergencies
Thermal container validation protocol
23 July 2026
Thermal container validation protocol

Which sections a protocol contains, how many loggers and repeat tests are needed, where the acceptance criterion comes from and how a deviation is recorded.

Measurement and traceability
How to investigate vertical temperature differences in a container
23 July 2026
How to investigate vertical temperature differences in a container

Map sensor positions to the load plan and synchronize clocks; do not treat a load-dependent difference as one sensor fault.

Risk and emergencies
How to select a challenging thermal transport scenario
23 July 2026
How to select a challenging thermal transport scenario

Choose a scenario from actual hot, long and frequent-opening operations; do not combine extremes that cannot occur together.

Measurement and traceability
How to investigate a temperature rise near a thermal container door
23 July 2026
How to investigate a temperature rise near a thermal container door

Map the door-area reading by position and time. It is an observation, not product temperature or an automatic disposal decision.

Risk and emergencies
When should thermal validation be separated for summer and winter?
22 July 2026
When should thermal validation be separated for summer and winter?

The calendar alone does not require repeat testing. Compare actual ambient, sun, load, start and route conditions with the validation envelope.

Measurement and traceability
How can full freezing of an eutectic plate be verified?
22 July 2026
How can full freezing of an eutectic plate be verified?

Check product instructions, plate condition and batch records rather than relying on surface frost.

Risk and emergencies
How many sensors for thermal mapping
22 July 2026
How many sensors for thermal mapping

The WHO guide starts from 12 fixed sensors; a medium-sized cold unit typically gets about 20 sensors plus one for ambient.

Measurement and traceability
Planning work between the cold room and dock
21 July 2026
Planning work between the cold room and dock

Count trips between the cold area and dock for one shift, then group work to reduce avoidable repeat entries.

Warehouse and dispatch
What belongs in a temperature logger calibration record?
21 July 2026
What belongs in a temperature logger calibration record?

Match device identity to reference, date, result and use decision; link certificate information to the relevant trip record.

Measurement and traceability
Why can logger and product temperatures differ?
21 July 2026
Why can logger and product temperatures differ?

Sensor position, response and load produce different measurements; align measurement purpose and method before comparing.

Risk and emergencies
Build a sensor map from pilot findings
21 July 2026
Build a sensor map from pilot findings

Select sensor points from pilot load geometry and observed hot or cold spots; record location evidence rather than a fixed device count.

Measurement and traceability
A sunken floor and the balance of a container
20 July 2026
A sunken floor and the balance of a container

Some equipment faults come from the floor the equipment stands on. An uneven floor tips the container, ruins the same wheel, rolls an unbraked container away and shifts the stack. At what slope a wheeled container starts moving on its own follows from its wheel data.

Warehouse and dispatch
How should you decide whether to push or pull a wheeled container?
20 July 2026
How should you decide whether to push or pull a wheeled container?

Assess route, load and equipment instructions together; log points where movement is difficult.

Containers and equipment