Containers and equipment30 / 52

Confirm accessory compatibility by model and serial, plus its effects on capacity and cleaning.

Capacity, payload and external sizes of GEBHARDT's three ripening containers, how the load limit cuts the block count, and a comparison with the İzmir Tulum tin.

Verify tray, valve and drainage steps against the exact model instructions. Handle leaks, discharge point and cleaning records under site procedure.

Do not assume the display is product temperature or a trip record. Verify its sensing point, device documentation and comparison with a reference.

The GEBHARDT TBX takes up to five product shelves. Crate height and the inner tub decide how many levels fit; in a TBX 725, a crate 40 mm taller drops four levels to three.

Stacking plates can leave the freezer's job half done. A rack keeps an air gap between plates so cold air reaches every plate, which makes the number of ready plates per day plannable.

34 mm is the thickness shared by the seven eutectic plates GEBHARDT lists on gebhardt.eu. What tells the plates apart is melting point, length and width, and article number.

GEBHARDT lists two body sizes under separate codes. Match to the container; fit does not prove capacity or hold time.

Compare body width with container dimensions, then verify access, restraint and vehicle load limits.

Do not select 500 or 700 kg from a range name. Compare exact model documentation, loaded configuration and vehicle limits.

GEBHARDT describes the pallet-base Isotec TBX as accessible from four sides by forklift and pallet truck. Payload is 500 kg on the wheeled model and 700 kg on the pallet model; the depot equipment and the route decide the choice.

Instead of guessing how many crates fit, you can calculate it from the internal dimensions. The arithmetic is simple, yet the result should be confirmed against a drawing before ordering.

Compare the current model drawing with clear measurements for doors, aisles, lifts and unloading areas.

Do not assume all four codes share a base or fixed heights. Compare variant drawings and measure route clearance and crate stacking.

Verify the 163 mm difference and shared footprint against the variant drawing. Measure vehicle, doorway and lift clearance with the real load.

Do not assume equal width or crate fit. Check external and internal dimensions for the exact model code, then trial with your packaging.