Cost and investment9 / 27

The former eTBX Freezer's 56-plate figure is archival. The factory removed the model from its sales range in July 2026; plan from measured cycles.

When using an official series, match product code, period, unit, and release date to your company data.

Do not treat an industry total as a target; measure your peak load, usable space and shift flow.

Match net weight with dollar value for the same product group and period; do not treat an early interim release as a full period.

Do not confuse export value with packaging expense; match your shipment costs to net tonnes moved.

In 2025 anchovy was the largest marine fish catch at 245,261 tonnes. What looks like an annual figure is squeezed into the months when purse-seining is open and into the morning landings.

In GCCA's 2026 list the top 25 operators run 219.7 million m³ of temperature-controlled space. Growth slowed to 6.3%, below the 8.3% of 2025.

Compare the trolley and box at their different workflow steps using a sample and route trial.

Choose by product condition, actual carton suitability, cold source, closure, preparation and cost per completed use rather than litres alone.

Ordinary ice melts at 0 °C and leaves free water in the box. A sealed pack keeps its filling inside the shell, and a eutectic plate can be chosen with a melting point between -3 and -21 °C.

A gel pack made for reuse can be refrozen while its shell stays intact. The freezer setting follows the plate's melting point, and for vaccines CDC sets a stricter rule.

A set goes out in the morning, comes back at night and has to freeze. The set count follows from the length of that cycle, the dispatch interval and the routes leaving together.

A large box reduces pack count and wall area, while small boxes divide deliveries. Payload, opening order, handling and void volume are calculated together.

A k-value alone cannot give hold hours; measure area, temperature difference, load, and door openings too.

Weigh and measure product, packaging and fittings in a real shipment. Keep model payload separate from site handling assessment.

Compare active, passive and combined setups by product condition, tested route, load fit, preparation capacity, returns and same-period utilisation cost.