BlogPage 149 / 155

Eutectic plates do not remove cooling energy, they move it into the depot. Below: GEBHARDT's plate table, Carrier's fuel figures and a worked calculation for one route.
Fleet and refrigeration units
GEBHARDT's Isotec TBX with eutectic plates keeps the cold chain intact for up to 24 hours. The real time on a route depends on plate type, goods, fill level, pre-cooling and door openings; the plate itself is ready after 15-21 hours in the freezer.
Eutectics and insulation
The footprint of wasted food varies by product. Weigh losses, record the cause, and use a sourced factor before estimating emissions.
Sustainability and carbon
Link chilled-product preparation, loading and final handoff records to the same batch; keep them separate from the hot-food flow.
Food quality and shelf life
Track the cold chain at picking, staging, loading, on route and at the door, not only inside the vehicle.
Transport and routing
Identify little-used containers, then compare dimensions, washing, customer and pallet fit before switching.
Containers and equipment
When an alarm arrives, verify the record and product condition, identify the affected lot, and document disposition under the authorised procedure.
Risk and emergencies
Track shelf availability alongside stock age and sales rate. Compare saleable stock with expected demand until the next delivery.
Retail operations
Regulation (EU) 2025/40 has applied since 12 August 2026. The 40 percent reuse duty for transport packaging from 2030, who carries it, and why cardboard boxes fall outside that target.
Regulations and standards
Record wet areas, crushed corners and label legibility; decide on use against product and packaging requirements.
Single-use packaging
HELCOM's 11% is the item-count share of EPS/XPS at six beaches. Weight was not reported for that survey.
Single-use packaging
Use the same functional unit and system boundary in an LCA; source washing, returns, loss and end-of-life data from your own operation.
Managing reusable containers
Map critical equipment and supplier dependencies; verify backup capacity with an outage test, not by label alone.
Cost and investment
Define OTIF and temperature compliance separately; record the denominator, receiving measurement, and route for every delivery.
Supply relationships
Test the box, product load, and actual delivery route together, including any doorstep wait.
Transport and routing
Do not infer delivery frequency or crate type from the channel name. Compare SKU lines, pack dimensions, booking and returns terms.
Retail operations