Containers and equipment21 / 52

Container payload does not rate an internal grid or shelf; check the document and loading arrangement.

Compare removability, cleaning, plate fit and loading arrangement for the exact configuration.

Match pre-cooling, plate and cleaning steps to the model and product conditions.

Do not assume a fixed duration; match model instructions, surface readings and loading time.

The eutectic plate comes out of the container and is washed by hand at a separate bench. After washing, the filling has to freeze through again, and the plan is built on the 24-hour freezing time in the GEBHARDT table.

Washer capacity alone does not set the limit; verify the setting against the container manual.

Do not infer acid effects from a general rule; confirm coating type and product instructions in writing.

Choosing a detergent looks like a hygiene decision. It is really a decision about how long the galvanised metal parts of the box will last; the limit is set by the product and its concentration as well as by pH.

Do not order by capacity figure alone; confirm item number, plate fit and chamber access.

Colour or phase point alone does not identify a plate's contents or concentration. Match the product code and data sheet before ordering.

Use site damage to identify where a bumper should protect. Confirm fit, dimensions and replacement details in the model documents.

Do not infer performance from application method alone; review test and repair documents for the exact construction.

Confirm RAL code and custom options for the exact model; plan operational identification separately.

Do not assume 800 × 1200 mm; compare the exact model drawing with warehouse, rack and handling space.

Swivel and fixed castor layouts depend on the model. Test manoeuvring and stopping with a loaded carrier on the actual floor.

A 70°C value does not apply to every magnet. Check the option's datasheet and actual surface conditions.